Knee Arthroscopy

Knee arthroscopy is one of the most common orthopedic surgeries nowadays and it allows for the successful treatment of multiple knee joint issues at once and with minimal invasion.

  • Rapid healing of the patient
  • Better access to the posterior part of the knee, compared to open surgery
  • No hospital stay is needed in the majority of cases

Shoulder Arthroscopy

The minimally invasive surgical treatment of the shoulder is considered safe and utterly effective for a number of conditions including early shoulder arthritis.

  • Extensively applied for athletic injuries
  • Short recovery period
  • No hospital stay

Hip Arthroscopy

Hip arthroscopy can treat conditions such as hip impingement, repair of labral tear, removal of loose fragments of cartilage, inflamed joint lining and painful bone spurs.

  • Causes less trauma to the joint and therefore less pain for the patient
  • Short recovery and return to normal activities
  • Less joint stiffness

What sets us apart

Technical Parameters

Input Voltage

198~242V 50Hz/100~120V 60Hz

converted automatically for exporting

Working Frequency

100KHz ± 10%

Working Mode

ABLATION: 1-10

PLACOAG: 1-10

Output Power

ABLATION ≤ 350W

PLACOAG ≤ 100W

Physical Dimensions

409*460*145mm

7kg

PLA800 Surgical System

Bipolar Plasma

Bipolar cutting and coagulation, working frequency of 100KHz, The surgical system offers 2 working modes:

ABLATION mode (cutting, hemostasis, ablation, vaporization),

PLACOAG mode (hemostasis, coagulation).

Low Temperature

Low temperature (40˚-70˚C) ablation and coagulation. The low temperatures ensure reduced pain after surgery, as well as controlled thermal impact.

Intuitive Design

  • Automatic impedance feedback and energy level detection
  • Convenient timing display
  • Automatically identifies the status of the footswitch and the probe
  • Automatically detects the plasma density at the tip of the probe

Precision

The thin plasma layer with depth ablation between 50 and 100 microns empowers surgeons to cut precisely, removing only the target tissue and reducing the risk of damaging surrounding tissue.

At the lower edge of the high frequency spectrum

Our generator operates on the lowest possible frequency (100 kHz) – where muscle and nerve stimulation seize and electrosurgery begins! Thus, Mechan’s plasma generator allows for prolonged stable plasma field (active plasma time), low operating temperatures (little or no thermal effect) and stunning visibility (little or no bubbles).

Working frequency 350-430 KHz

Working frequency 100 KHz

Our Solutions for arthroscopic surgery
High Quality Materials
Resistant, Reliable, Durable
Anatomical
Precise Resection
Free field of vision
Irrigation & Suction

Tendon Decompression

The PLA302 is a 30º cone-shaped probe, is designed with the highest quality stainless steel, tungsten, polyimide, silicone and PET materials.

  • 86mm working length
  • 1.5mm outer diameter

Synovial Bursa Excision

Knee & Shoulder

The PLA305 is a 90 ̊ Probe for Synovial Bursa Excision –  the perfect choice for comfortable and minimally-invasive Knee & Shoulder procedures.

  • 14 pins
  • 135mm
  • 4.0 mm diameter of shaft

30 Degree Small Joint Probe

The PLA306-2 is a 30 ̊ Probe with 12 pins and is fantastic for small joint resection, angioplasty, debridement and ablation. It provides surgeons with the opportunity for stress-free elbow & ankle joint operations and patients for quick recovery and reduced pain experience.

  • 135 mm working length
  • 3.6 mm outer diameter

30 Degree Knee & Shoulder Joint Probe

The PLA306-3 is a 30 ̊ bipolar probe with 7 pins and is fantastic for resection, angioplasty, debridement and ablation. It is widely used for shoulder joint surgeries.

  • 82 mm working length
  • 2.8 mm outer diameter

45 Degree Small Joint Probe

The PLA306-7 is a 45 ̊ bipolar probe with 12 pins and is fantastic for small joint resection, angioplasty, debridement and ablation. It provides surgeons with the opportunity for stress-free elbow & ankle joint operations and patients for quick recovery and reduced pain experience.

  • 135 mm working length
  • 3.6 mm outer diameter

PLA407-1 90 Degree Probe

The PLA407-1 is a 90 ̊ Probe and is widely used in various joints such as knee, shoulder and hip joints for resection, angioplasty, debridement and ablation.

  • 135 mm working length (also available in 180 mm and 220 mm length)
  • 4.0 mm outer diameter
  • Also available with finger switch control

PLA407-2 90 Degree Probe

The PLA407-2 is a 90 ̊ Probe and is widely used in various joints such as knee, shoulder and hip joints for resection, angioplasty, debridement and ablation.

  • 135 mm working length (also available in 180 mm and 220 mm length)
  • 4.0 mm outer diameter
  • Also available with finger switch control

PLA407-3 50 Degree Probe

The PLA407-3 is a 50 ̊ Probe and is widely used in various joints such as knee, shoulder and hip joints for resection, angioplasty, debridement and ablation.

  • 135 mm working length (also available in 180 mm and 220 mm length)
  • 4.0 mm outer diameter
  • Also available with finger switch control

Safe

Protects the surrounding tissues by reducing injury. The low temperatures ensure reduced pain after surgery.

Precise

The thin plasma layer empowers surgeons to cut precisely and reduces the risk of damaging surrounding tissue and removes only the target tissue.

Smart

Intuitive and procedure-oriented system for optimal outcome: procedure-optimized electrodes, intelligent technology and special safety features.

Efficient

The effective and reliable control of bleeding enables great hemostasis and reduced operative time. Reduced hospital stay and readmissions, as well as short recovery time and reduced side effects.